Repair Procedures: Removal

Remove valve core and deflate the tire.
Remove the side of the tire bead area from the wheel using tire changing machine.

Fig 1: Removing Side Of Tire Bead Area From Wheel Using Tire Changing Machine
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.
- Avoid tire/tool contact with the valve on dismount.
- Dismount should end near the valve.
Rotate the wheel clockwise.

Fig 2: Removing Top Part Of Tire With Bead Breaker (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Removing Bottom Part Of Tire With Bead Breaker (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA