Front Power Window Motor Inspection

1. Remove the front door trim panel.

   (Refer to "FRONT DOOR ")

2. Disconnect the connector from the motor.

   Driver 

   Fig 1: Locating Front Power Window Motor Connector Terminals (Driver)

   Courtesy of HYUNDAI MOTOR AMERICA

   Assistant 

   Fig 2: Locating Front Power Window Motor Connector (Assistant)

   Courtesy of HYUNDAI MOTOR AMERICA
3. Connect the motor terminals No. 2 and No. 3 directly to battery voltage (12V) and connect the motor terminal No. 4 to ground (0V).

   Check that the motor operates smoothly.

   If the operation is abnormal, replace the motor.

   Safety Power Window 

   Fig 3: Safety Power Window Connector Terminals Continuity Chart

   Courtesy of HYUNDAI MOTOR AMERICA
4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

General Window 

Fig 4: General Window Connector Terminals Continuity Chart

Courtesy of HYUNDAI MOTOR AMERICA