Neutralization Status Check

Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
After IG ON, select the "Neutralization mode".

Fig 1: Scantool Display - Vehicle S/W Management
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Scantool Display - Neutralization Mode
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Scantool Display - ECM Neutralization
Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Scantool Display - SMK Neutralization
Courtesy of HYUNDAI MOTOR AMERICA