Repair Procedures: Inspection
- Turn OFF ignition switch and disconnect the negative (-) battery cable.
- Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - "AIR CLEANER ")
- Remove the battery and battery tray. (Refer to Engine Electrical System - "BATTERY ")
- Remove the engine control module (ECM). (Refer to Engine Control System - "ECM ")
- Disconnect the neutral switch connector (A).
- Check the continuity between no. 1 and 2 terminals of neutral switch. When the shift lever is in neutral, there should be continuity.
- If necessary, repair or replace the neutral position switch.