Section 43 (Blind Spot Detection System Diagnosis)
WARNING: This page is about a different car, the 2019 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
- DTC Index
- DTC C1101-17: Battery Voltage High
- DTC C1102-16: Battery Voltage Low
- DTC C120A-11: LED Right Circuit Short To Ground
- DTC C120B-15: LED Right Circuit Short To Battery Or Open
- DTC C120C-11: LED Left Circuit Short To Ground
- DTC C120D-15: LED Left Circuit Short To Battery Or Open
- DTC C1283-81: CAN Signal Error-YAW RATE SENSOR
- DTC C1501-01: Switch Failure
- DTC C160A-88: BSD Local CAN BUS OFF
- DTC C1611-87: CAN Time-out EMS
- DTC C1612-87: CAN Time-out TCU
- DTC C1613-81: CAN Signal Error EMS
- DTC C1616-88: Can Bus Off (C-Can)
- DTC C1625-87: CAN Time-out ABS/ESC (ESP)
- DTC C1628-87: CAN Time-out Cluster
- DTC C1642-81: CAN signal error-WHEEL SENSOR
- DTC C1646-81: CAN Message Failure - TCU
- DTC C1702-55: Variant Coding Error
- DTC C170A-11: Activation Switch LED Circuit Short To Ground
- DTC C170B-12: Activation Switch LED Circuit Short To Battery Or Open
- DTC C170C-04: ECU Hardware Error (REAR RIGHT)
- DTC C170D-04: ECU Hardware Error (REAR LEFT)
- DTC C1743-05: Software Mis-Match
- DTC C1816-87: CAN Time-out SJB
- DTC C1817-87: CAN Signal Error Gateway
- DTC C1822-87: CAN Time-out BCM
- DTC C2702-54: LEFT Control Module Missing Calibration
- DTC C2703-54: RIGHT Control Module Slave Missing Calibration