LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2021 >> Kona Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Ignition Switch Assembly >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD ")

  3. Remove the steering column upper & Lower shroud.
  4. Set the key to ACC.
  5. Disconnect the connector (A) and then remove the lock cylinder (C) after pushing the lock pin (B).
    G12607502Courtesy of HYUNDAI MOTOR AMERICA
    G12607503Courtesy of HYUNDAI MOTOR AMERICA
  6. Loosen the mounting bolts and then remove the ignition switch (B).
    G12607504Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals