Repair Procedures: Inspection
WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
Measure the resistance of pressure sensor
- Turn ignition switch OFF.
- Disconnect the pressure sensor connector.
- Measure resistance between sensor terminal and terminal.
- Check the measured resistance.
(Refer to table)
TERMINAL AND RESISTANCE SPECIFICATIONTerminal Resistance PIN 2 - PIN 3 153.2 - 255.36 kΩ PIN1 - PIN 3 50.3 - 75.6 kΩ PIN1 - PIN 2 123.36 - 328.56 kΩ