Repair Procedures: Installation
- To install, reverse the removal procedure.
- Inject the automatic transaxle fluid and inspect the fluid level. (Refer to Automatic Transaxle System - "AUTOMATIC TRANSAXLE FLUID (ATF)
")CAUTION:
- After ATF level check or exchange, be sure to remove residual ATF on transaxle case. (Be especially sure to remove residual ATF between automatic transaxle case and valve body cover)
- After installing the valve body cover, make sure to check the oil leakage at the connection area with the engine ON.
- Refil the coolant (Engine Mechanical System - "COOLANT ")
- Refil the coolant of hybrid motor cooling system. (Hybrid Motor System - "COOLANT ")