Repair Procedures: Installation
WARNING: This page is about a different variant/trim than selected.
- To install, reverse the removal procedures.
NOTE:
- Install the cable after placing the shift lever and the manual control lever in the N position.
CAUTION:
- Lug must assemble upward.
- Install the snap pin after placing the shift lever in the N position.
 Courtesy of HYUNDAI MOTOR AMERICA
|
- When assembling the snap pin, be careful about the correct direction.
- The band portion (A) must point to the front of the vehicle.
- The band portion (A) must point outwards.
 Courtesy of HYUNDAI MOTOR AMERICA
|