Position Switch: Troubleshooting
| Major Symptom | Expected Cause | Items to Check and Measures |
|---|---|---|
| Faulty engine start current gear not indicated in the cluster warning lamp ON engine stall while stopped creeping not possible Auto parking release disabled | Position switch circuit abnormal Position switch function abnormal |
Check the inspection FLOW and replace the position switch |
| Faulty position sensor "N" setting | Use the "N" setting jig and adjust the "N" setting. (Refer to Dual Clutch Transmission Control System - "POSITION SWITCH ") | |
| Shift cable separation faulty | Adjust shift cable separation (Refer to Dual Clutch Transmission Control System - "POSITION SWITCH ") | |
| Position switch vehicle side circuit abnormal | Check the connection of junction box power terminal, fuse (TCU) terminal and replace the junction box or adjust the gap | |
| Check inside the position switch connector for foreign substance and whether terminal is bent | ||
| Poor ground condition on position switch wire | Check the ground condition of wire and retighten it | |
| Poor position unit (disconnection/short-circuit) | Replace position switch (refer to position switch inspection) |