Fingerprint Add
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Fingerprint is registered under ccNC profile menu while the motor is on. Each driver profile (Total 2) can register a fingerprint.
- When registering fingerprint, the driver must possess both smart keys to confirm s/he is the driver of the vehicle. (Both smart keys are required to access fingerprint registration mode.)
- Start the IGN ON) and position both smart keys inside the vehicle.
Information
- It is possible to register & remove fingerprint with a smart card key (sold separately) and a smart key.
- It is NOT possible to register & remove fingerprint with a smart key and a digital card key.
- Select the driver 1 (or 2) in ccNC driver profile, then select register & remove fingerprint.
- Follow the instruction and place your finger on the authentication sensor to register fingerprint.NOTE:
- Follow the instruction and reposition your finger to register, until it is completely registered. (100%)
- Once registration is done, AVNT screen will display a message telling that fingerprint registration is complete.