Operation Check
- If CRUISE indicator light flashes during ASCD operation, stop vehicle and turn ASCD main switch off. Turn ASCD main switch on again. If CRUISE indicator light blinks, go to DIAGNOSTIC PROCEDURE 5 under DIAGNOSTIC CHARTS. If indicator light does not blink, go to next step.
- Turn ASCD main switch off. Drive vehicle, and turn ASCD main switch back on. Push SET/COAST switch, and note indicator light. If indicator light blinks, go to next step. If indicator light does not blink, go to step 4).
- Perform DIAGNOSTIC PROCEDURE 7 under DIAGNOSTIC CHARTS. Repair or replace as necessary. If system tests okay, perform DIAGNOSTIC PROCEDURE 6 . Repair or replace as necessary. If system tests okay, replace ASCD control unit.
- Slowly depress brake pedal for at least 5 sec. Observe indicator light. If light blinks, go to DIAGNOSTIC PROCEDURE 4 under DIAGNOSTIC CHARTS. If indicator light does not blink, system is okay. Recheck system operation.