Fail-Safe Mode Check: Notes

Fail-safe mode monitors system for malfunctions. If any of the following conditions are detected, CRUISE indicator light will flash in 0.4 second intervals, and fail-safe mode will deactivate ASCD operation.

• Stuck ASCD Steering Switch (RESUME/ACCEL, CANCEL, SET/COAST)
• Open Or Shorted Vacuum Motor Ground/Power Circuit
• Open Or Shorted Air Valve Ground/Power Circuit
• Open Or Shorted Release Valve Ground/Power Circuit
• Faulty Vehicle Speed Sensor (VSS)
• Faulty ASCD Control Unit Internal Circuit
• Faulty ASCD Cancel Switch Or Stoplight Switch

Except for faulty ASCD cancel switch or stoplight switch, all other listed malfunctions will cause cancellation of vehicle speed memory.