System Description: Inputs

Power is supplied at all times

to smart entrance control unit terminal 11

through circuit breaker

through 40A fusible link (letter f  located in the fuse and fusible link box),

to key switch terminal 2, and

to smart entrance control unit terminal 10

through 7.5A fuse [No. 24, located in the fuse block (J/B)].

to multi-remote control relay terminals 1, 3 and 6

through 15A fuse [No. 20, located in the fuse block (J/B)].

to horn relay terminals 1 and 3

through 7.5A fuse [No. 52, located in the fuse block (J/B)].

to horn relay terminal 6

through 10A fuse [No. 54, located in the fuse block (J/B)].

When the ignition switch is in the ACC or ON position, power is supplied to smart entrance control unit terminal 21.

When the key switch is ON (ignition key is inserted in key cylinder), power is supplied

through key switch terminal 1

to smart entrance control unit terminal 32.

When the front door switch LH is OPEN, ground is supplied

to smart entrance control unit terminal 29

through front door switch LH terminal 1

to front door switch LH terminal 2

through body grounds B11, B22 and D210.

When the front door switch RH is OPEN, ground is supplied

to smart entrance control unit terminal 40

through body grounds B55 and B75.

When the other door switches are OPEN, ground is supplied

to smart entrance control unit terminal 28

through other door switches body grounds.

Remote controller signal is inputted to smart entrance control unit (The antenna of the system is combined with smart entrance control unit).