July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hazard and Horn Reminder: Notes

Power is supplied at all times

to multi-remote control relay terminals 1, 3 and 6
through 10A fuse [No. 20, located in the fuse block (J/B)],
to horn relay terminals 1 and 3
through 10A fuse (No. 36, located in the fusible link and fuse box) and
to horn relay terminal 6
through 10A fuse (No. 41, located in the fusible link and fuse box).

When smart entrance control unit receives LOCK or UNLOCK signal from remote controller with all doors closed, ground is supplied

to multi-remote control relay terminal 2
through smart entrance control unit terminal 7, and
to horn relay terminal 2
through smart entrance control unit terminal 19

Multi-remote control relay and horn relay are now energized, and hazard warning lamp flashes and horn sounds as a reminder.

The hazard and horn reminder has a horn chirp mode and a non-horn chirp mode.