Rear View Camera Operation: Notes

WARNING: This page is about a different car, the 2004 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.

When A/T selector lever is in reverse position, power is supplied

through back-up lamp relay terminal 1
to TCM terminal 41.

Then back-up lamp relay is energized

from back-up lamp relay terminal 3
to rear view camera control unit terminal 10.

Then, rear view camera control unit is sent camera ON signal

through rear view camera control unit terminal 6
to rear view camera terminal 1.

An image taken by rear view camera is sent

through rear view camera terminals 3 and 4
to rear view camera control unit terminals 18 and 16.

Then an image is sent

through rear view camera control unit terminals 22 and 24
to the display terminals 9 and 10.

An image of rear view will be projected on the display.