Door Lock Function Malfunction
Before conducting the diagnosis in the following table, check all power door lock system function. Refer to SYSTEM DESCRIPTION .
TROUBLE DIAGNOSIS SYMPTOM (DOOR LOCK FUNCTION MALFUNCTION)
| Symptom | Diagnoses service procedure |
|---|---|
| Door lock/unlock does not operate when door request switch operation is used (power door lock system is normal). | 1.Check door lock/unlock setting |
| 2. Check outside key antenna | |
| 3.Intelligent Key inspection | |
| 4. Replace Intelligent Key unit | |
| Door lock/unlock do not operate using door request switch operated (power door lock system is normal). | 1. Check door switch |
| 2. Check key switch (Intelligent Key unit input) | |
| 3.Check ignition knob switch | |
| 4. Replace Intelligent Key unit | |
| Driver side selective door unlock function does not operate, when door request switch is operated. (All other door lock function is OK.) |
1.Check selective door unlock setting |
| 2. Replace BCM | |
| Passenger side selective door unlock function does not operate, when door request switch is operated. (All other door lock function is OK.) |
1. Check selective door unlock setting |
| 2. Check passenger side select unlock relay | |
| 3. Replace Intelligent Key unit | |
| Hazard lamps do not flash during door lock operation using door request switch operated. (Turn signal lamp operation is normal.) (All other door lock function is OK.) |
1. Check key reminder setting |
| 2. Replace BCM | |
| 3. Replace Intelligent Key unit | |
| Hazard lamps do not flash during door lock operation using door request switch operated. (Turn signal lamps do not operate.) | Check hazard function |
| Intelligent Key warning buzzer does not sound during door lock/unlock operation using Intelligent Key (regardless of whether Intelligent Key remote controller button or request switch operation is used). | 1. Check if the operation confirmation Intelligent Key warning buzzer was cancelled by the CONSULT-II settings change function |
| 2. Check Intelligent Key warning buzzer | |
| 3. Replace Intelligent Key unit | |
| Door lock/unlock operation confirmation Intelligent Key warning buzzer sounds, but door lock actuator does not operate. (And hazard lamps do not flash.) | 1. Check CAN communication |
| 2. Replace Intelligent Key unit |