Removal And Installation: Installation

WARNING: This page is about a different car, the 2004 Infiniti FX45 and 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Set key interlock cable to key cylinder and install holder.
Clamp key interlock cable and fix to key interlock cable with band.
Turn ignition key to lock position.
Set selector lever to P position.

Fig 1: Installation of Key Interlock Cable (1 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.
Insert interlock rod into adjuster holder.
Install casing cap to bracket.
Move slider in order to fix adjuster holder to interlock rod.

Fig 2: Installation of Key Interlock Cable (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.