Driver Information System
- Precaution
- Combination Meters
- System Description
- Component Parts and Harness Connector Location
- Arrangement of Combination Meter
- Circuit Diagram
- Wiring Diagram - METER -
- Terminals and Reference Value for Combination Meter
- Terminals and Reference Value for Unified Meter and A/C Amp.
- Self-Diagnosis Mode of Combination Meter
- CONSULT-II Function (METER A/C AMP)
- Trouble Diagnosis
- Symptom Chart 1
- Symptom Chart 2
- Power Supply and Ground Circuit Inspection
- Vehicle Speed Signal Inspection
- Engine Speed Signal Inspection
- Engine Coolant Temperature Signal Inspection
- Fuel Level Sensor Signal Inspection
- Odo/Trip Meter and Illumination Control Switch Inspection
- Fuel Gauge Pointer Fluctuates, Indicator Wrong Value or Varies
- Fuel Gauge Does Not Move to FULL Position
- Electrical Components Inspection
- Removal and Installation of Combination Meter
- Disassembly and Assembly of Combination Meter
- Removal and Installation of Odo/Trip Meter and Illumination Control Switch
- Unified Meter And A/C Amp
- Compass
- Warning Lamps
- A/T Indicator
- Warning Chime
- System Description
- CAN Communication System Description
- CAN Communication Unit
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - CHIME -
- Terminals and Reference Value for BCM
- Terminals and Reference Value for Unified Meter and A/C Amp.
- Terminals and Reference Value for Combination Meter
- Trouble Diagnosis
- CONSULT-II Function (BCM)
- All Warnings Are Not Operated
- Key Warning Chime and Light Warning Chime Does Not Operate (Seat Belt Warning Chime Does Operate)
- Key Warning Chime Does Not Operate (Without Intelligent Key)
- Key Warning Chime Does Not Operate (With Intelligent Key, When Mechanical Key Is Used)
- Key Warning Chime Does Not Operate (With Intelligent Key, When Intelligent Key Is Carried With The Driver)
- Light Warning Chime Does Not Operate
- Seat Belt Warning Chime Does Not Operate
- Lane Departure Warning System
- Precautions for Lane Departure Warning (LDW) system
- System Description
- CAN Communication
- Action Test
- Camera Aiming Adjustment
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - LDW -
- Terminals and Reference Value for LDW Camera Unit
- CONSULT-II Function (LDW)
- Trouble Diagnosis
- Preliminary Inspection
- Power Supply and Ground Circuit Inspection
- DTC [C1B00] Camera Unit MALF
- DTC [C1B01] Cam Aiming INCMP
- DTC [C1B02] VHCL SPD Data MALF
- DTC [C1B03] ABNRML Temp Detect
- DTC [U1000] Can Comm Circuit
- DTC [U1010] Control Unit (Can)
- LDW Chime Circuit Inspection
- LDW Switch Circuit Inspection
- LDW Indicator Lamp Circuit Inspection
- Turn Signal Input Inspection
- Removal and Installation for LDW Camera Unit
- Removal and Installation for LDW Chime
- Removal and Installation for LDW Switch
- Clock
- Rear View Monitor
- System Description
- Component Parts and Harness Connector Location
- Schematic
- Wiring Diagram - R/VIEW -
- Terminals and Reference Value for Rear View Camera Control Unit
- CONSULT-II Function (REARVIEW CAMERA)
- Side Distance Guideline Correction
- Power Supply and Ground Circuit Inspection
- Rear View Is Not Displayed With The A/T Selector Lever In R-Position
- The Rear View Image Is Distorted
- Removal and Installation of Rear View Camera Control Unit
- Removal and Installation of Rear View Camera