Removal And Installation: Removal

WARNING: This page is about a different car, the 2004 Infiniti FX45 and 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Unlock slider by squeezing lock tabs on slider from adjuster holder.
Remove casing cap from bracket of control device assembly and remove interlock rod from adjuster holder.

Fig 1: Removal of Key Interlock Cable (1 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove holder from key cylinder and remove key interlock cable.

Fig 2: Removal of Key Interlock Cable (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.