LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2003 >> FX45 >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Brake Control System) >> Trouble Diagnosis >> Consult-II Functions >> CONSULT-II Basic Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT-II Basic Operation Procedure

WARNING: This page is about a different car, the 2004 Infiniti FX45 and 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
    NOTE: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
  3. Turn ignition switch ON.
  4. Touch "START (NISSAN BASED VHCL)".
    Fig 1: Viewing CONSULT-II Screen
    G00725420Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS" in the "SELECT SYSTEM" screen.

    If "ABS" is not indicated, go to CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ,

    Fig 2: Viewing SELECT SYSTEM Screen
    G00725421Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Select the required diagnostic location from the "SELECT DIAG MODE" screen.

    For further information, see CONSULT-II Operation Manual.

    Fig 3: Viewing SELECT DIAG MODE Screen
    G00725422Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals