LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2003 >> G35 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> ASCD Brake Switch >> Component Inspection >> Stop Lamp Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stop Lamp Switch

  1. Turn ignition switch OFF.
  2. Disconnect stop lamp switch harness connector.
  3. Check harness continuity between stop lamp switch terminals 3 and 4 under the following conditions.
    Fig 1: Stop Lamp Switch Terminals 3 And 4 Continuity Table
    G00720499Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Checking Harness Continuity Between Stop Lamp Switch Terminals 3 And 4
    G00720500Courtesy of NISSAN MOTOR CO., U.S.A.

    If NG, adjust stop lamp switch installation, refer to , and perform step 3 again.

scientia non olet · About LEMON Manuals