Testing Condition:

WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.

Before performing the following procedure, confirm that battery voltage is between 10V and 16V at idle.

With CONSULT-II

Turn ignition switch ON .

Fig 1: Displaying CONSULT-II DATA MONITOR Screen
Courtesy of NISSAN MOTOR CO., U.S.A.
Select DATA MONITOR mode with CONSULT-II.
Maintain the following conditions for at least 20 consecutive seconds.

Fig 2: Identifying Condition Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.
If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .