Operation Procedure

With the ignition switch OFF, connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector, and turn ignition switch ON.

Fig 1: Locating Data Link Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START(NISSAN BASED VHCL)".

Fig 2: Consult II Display (1 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "MULTIAV".
If "MULTIAV" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

Fig 3: Consult II Display (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.
Select "VERSION", "SELF-DIAG RESULTS" or "SIGNAL MONITOR".