LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> G35 Base, 2D Coupe, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> 2004 - Engine Control System - Coupe >> Trouble Diagnosis >> Generic Scan Tool (GST) Function >> Inspection Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Procedure

  1. Turn ignition switch OFF.
  2. Connect "GST" to data link connector, which is located under LH dash panel near the hood opener handle. See Figure.
  3. Turn ignition switch ON.
  4. Enter the program according to instruction on the screen or in the operation manual.

    (*: Regarding GST screens in this section, sample screens are shown).

    Fig 1: GST Sample Screen
    G00723727Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Perform each diagnostic mode according to each service procedure.

    For further information, see the GST Operation Manual of the tool maker. 

Fig 2: GST Sample Screen
G00723728Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals