LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (2004 - Engine Control System - Coupe) >> DTC P1148, P1168: Closed Loop Control >> Overall Function Check >> With GST
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With GST

WARNING: This page is about a different variant/trim than selected.
  1. Start engine and warm it up to normal operating temperature.
  2. Set voltmeter probes between ECM terminal 35 [HO2S1 (B1) signal] or 16 [HO2S1 (B2) signal] and ground.
    Fig 1: Overall Function Check
    G00720386Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check the following with engine speed held at 2,000 rpm constant under no-load.
    • The voltage should go above 0.70V at least once.
    • The voltage should go below 0.21V at least once.
  4. If NG, go to "Diagnostic Procedure ".