5. Check EVAP Purge Hose And Purge Port

1. Disconnect purge hoses connected to EVAP service port A and EVAP canister purge volume control solenoid valve B .
2. Blow air into each hose and EVAP purge port C.
   Fig 1: Locating Purge Port C

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Check that air flows freely.

OK or NG 

OK (With CONSULT-II): GO TO 6.

OK (Without CONSULT-II): GO TO 7. CHECK EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE .

NG : Repair or clean hoses and/or purge port.