LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> QX56 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Body Control Modules) >> Programming >> Remote Transmitter Programming >> Remote Keyless Entry Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Keyless Entry Transmitter Programming

WARNING: This page is about a different car, the 2002 Pontiac Grand Am and 2002 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: A Tech 2 scan tool is recommended for programming purposes. Consult scan tool manufacturer owner manual for other scan tools to determine compatibility and usage.
NOTE: Scan tool must stay connected until all transmitters are programmed.
  1. Turn ignition switch to OFF position. Connect scan tool to Data Link Connector (DLC). DLC is located under driver side of instrument panel. Turn ignition switch to RUN position.
  2. Select REMOTE FUNCTION ACTUATION. Select SPECIAL FUNCTIONS. Select PROGRAM KEY FOBS. Select number of key fobs to be programmed.
  3. Press and hold LOCK and UNLOCK buttons simultaneously on first transmitter for approximately 15 seconds. Power locks should cycle to confirm programming of first fob is complete.
  4. Repeat previous step to program up to 4 transmitters.
  5. Remove scan tool. Exit vehicle. Using remote transmitter, attempt to lock/unlock doors to verify programming. Operate all transmitter functions to verify correct system operation.
scientia non olet · About LEMON Manuals