Diagnostic Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK OVERALL FUNCTION
Check ASCD indicator under the following conditions.

Fig 1: ASCD Indicator Condition Chart
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG
1. OK: INSPECTION END
2. NG: GO TO 2.
CHECK DTC
Check that DTC U1000 or U1001 is not displayed.

OK or NG
1. OK: GO TO 3.
2. NG: Perform trouble diagnoses for DTC U1000, U1001. Refer to DTC U1000. U1001 CAN COMMUNICATION LINE .
CHECK COMBINATION METER OPERATION
Does combination meter operate normally?

Yes or No
1. Yes: GO TO 4.
2. No: Check combination meter circuit. Refer to COMBINATION METERS .
CHECK INTERMITTENT INCIDENT
Refer to TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT .
1. INSPECTION END