LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2006 >> M35 x >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (VQ35DE) - DTCS P1220 To P2A03 >> DTC P1220 Fuel Pump Control Module (FPCM) >> DTC Confirmation Procedure >> With Consult-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Make sure that "COOLAN TEMP/S" indicates less than 70°C (158°F). If not, cool down the engine.
  3. Start engine.
  4. Hold vehicle at the following conditions for 12 seconds.
    ENGINE SPEED CONDITIONS

    ENG SPEED 1, 550 - 3, 250 rpm (AWD models)
    1, 450 - 3, 100 rpm (2WD models)
    VHCL SPEED SE More than 70 km/h (43 MPH)
    B/FUEL SCHDL 1.5 - 31.8 msec
    Selector lever Suitable position
  5. If 1st trip DTC is detected, go to , "DIAGNOSTIC PROCEDURE ".
Fig 1: Consult-II DATA MONITOR Display Screen
G04074727Courtesy of NISSAN MOTOR CO., U.S.A.