System Description: Notes

• When handling seat, be extremely careful not to scratch heating unit
• To replace heating unit, seat trim and pad should be separated.
• Do not use any organic solvent, such as thinner, benzene, alcohol, etc. to clean trims.

Power is all times supplied

• through 40A fusible link [Letter H, located in the fuse block (J/B)],
• to rear power seat control unit LH and rear power seat control unit RH terminal 2.

With the ignition switch to ON or START position, power is supplied

• through 20A fuse [No. 81, located in the fuse block (J/B)]
• to front heated seat switch (driver side, passenger side) terminal 1, and
• to rear power seat control unit LH, RH terminal 44,
• to rear power seat switch (heater switch) terminal 1