Terminals and Reference Value for Rear View Camera Control Unit
TERMINALS AND REFERENCE VALUE FOR REAR VIEW CAMERA CONTROL UNIT
| Terminal No. (Wire color) | Item | Condition | Reference value (Approx.) | ||
|---|---|---|---|---|---|
| (+) | (-) | Ignition switch | Operation | ||
| 1 (PU/W) | Ground | Battery power supply | OFF | - | Battery voltage |
| 2 (OR/L) | ACC power supply | ACC | - | Battery voltage | |
| 3 (B/Y) | Ground | ON | - | 0 V | |
| 4 (R/B) | Reverse signal input | ON | A/T selector lever "R" position | 12 V | |
| A/T selector lever in other than "R" position | 0 V | ||||
| 5 (L) | Rear view camera recognition signal | ON | - | 0 V | |
| 8 (R/G) | Camera power output | ON | A/T selector lever "R" position | 6 V | |
| 9 | Camera image input (-) | ON | - | 0 V | |
| 10 (W) | 9 | Camera image input (+) | ON | A/T selector lever "R" position | |
| 11 | Ground | Composite ground | ON | - | 0 V |
| 12 (B) | 11 | Composite image output | ON | A/T selector lever "R" position | |
| 14 (W) | 11 | Composite image synchronization signal output | ON | A/T selector lever "R" position | |