LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2007 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing (Coupe) >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    TERMINALS CONTINUITY CHART

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist

    If NG, adjust ASCD clutch switch installation, refer to "CLUTCH PEDAL ", and perform step 3 again.

    Fig 1: Checking Continuity Between Harness Connector terminals 1 And 2
    G04080991Courtesy of NISSAN MOTOR CO., U.S.A.