Operation Condition
Once the following condition from below is established, alert or warning will be executed.
OPERATION CONDITION CHART
| Warning/Information functions | Operation procedure | |
|---|---|---|
| Intelligent Key system malfunction | When a malfunction is detected on Intelligent Key unit, "KEY" warning lamp will illuminates. | |
| OFF position warning | For internal |
|
| For external | OFF position warning (For internal) is in active mode, driver side door has been closed.
NOTE:
OFF position (For external) active only when each of the sequence has occurred as below: P position warning → ACC warning → OFF position warning (For internal) → OFF position warning (For internal)
|
|
| P position warning |
|
|
| ACC warning |
|
|
| Take away warning | Door is open to close |
|
| Door is open |
|
|
| Push-ignition switch operation |
|
|
| Take away through window |
|
|
| Intelligent Key is removed from key slot |
|
|
| Door lock operation warning | Request switch operation | When request switch is pushed (lock operation) under the following conditions.
|
| Intelligent Key button operation | When Intelligent Key bottom is pushed (lock operation) under the following conditions.
|
|
| Key warning |
|
|
| Intelligent Key insert information |
|
|
| Engine start information | Ignition switch is ON position |
|
| Ignition switch is except ON position |
|
|
| Steering lock information | When steering lock can not be released after ignition switch is turned ON. | |
| Intelligent Key low battery warning | When Intelligent Key is low battery, Intelligent Key unit is detected after ignition switch is turned ON. | |
| Key ID warning | When registered Intelligent Key can not be detected inside the vehicle after ignition switch is turned ON. | |