LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2008 >> FX45 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VK45DE) - System And Component Troubleshooting >> ICC Brake Switch >> Component Inspection >> ICC Brake Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ICC Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ICC brake switch harness connector.
  3. Check continuity between ICC brake switch terminals 1 and 2 under the following conditions.
    CONTINUITY CONDITIONS

    Condition Continuity
    Brake pedal: Fully released Should exist
    Brake pedal: Slightly depressed Should not exist
  4. If NG, adjust ICC brake switch installation, refer to "BRAKE PEDAL ", and perform step 3 again.
Fig 1: Checking Continuity Between ICC Brake Switch Terminals 1 And 2
G04900677Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals