July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Av Communication System

Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

Fig 1: Locating Repaired Area
Courtesy of NISSAN MOTOR CO., U.S.A.
Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

Fig 2: Locating Bypass Wire Connection
Courtesy of NISSAN MOTOR CO., U.S.A.