DRIVER SIDE : Component Function Check

1. Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data Monitor" with CONSULT-III.
2. Check mirror sensor (driver side) signal under the following condition.
   MONITOR ITEM VALUE REFERENCE
   
   

   Monitor item	Condition	Value
   MIR/SEN LH U-D	Door mirror (driver side)	Change between 3.4 V (close to peak) 0.6 V (close to valley)
   MIR/SEN LH R-L		Change between 0.6 V (close to left edge) 3.4 V (close to right edge)

Is the indication normal? 

YES: INSPECTION END

NO: Perform diagnosis procedure. Refer to "DRIVER SIDE : DIAGNOSIS PROCEDURE ".