Component Function Check

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before performing the diagnosis, check that the following is normal.

Battery saver output/power supply
Cargo lamp bulb
Tailgate cargo lamp bulbs

CHECK CARGO LAMP OPERATION

CONSULT-III

Turn ignition switch ON.
Select "LUGGAGE LAMP TEST" of BCM (INT LAMP) active test item.
With operating the test items, check voltage between cargo lamp relay harness connector M150 terminal 3 and ground.

TERMINALS VOLTAGE REFERENCE

(+)		(-)	Voltage
Connector	Terminal	(-)	Voltage
M150	3	Ground	Battery voltage

Fig 1: Identifying Voltage Between Cargo Lamp Relay Harness Connector M150 Terminal 3 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

Is battery voltage present?

Yes: Cargo lamp relay is operating normally.

No: Refer to , "DIAGNOSIS PROCEDURE ".