Component Function Check
WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before performing the diagnosis, check that the following is normal.
- Battery saver output/power supply
- Step lamp and/or foot lamp bulb
- CHECK STEP LAMP OPERATION
CONSULT-III
- Turn ignition switch ON.
- Select "STEP LAMP TEST" of BCM (INT LAMP) active test item.
- While operating the test items, check that the front/rear step lamps and foot lamps (if equipped) turn ON/OFF.
ON : Step lamp ON
OFF : Step lamp OFF
Do the lamps turn ON/OFF?
Yes: Step lamp circuit is operating.
No: Refer to , "DIAGNOSIS PROCEDURE ".