Power Window Master Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
1. Install the master switch with the 3 screws.
  
  Fig 1: Identifying Power Window Regulator Master Switch Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT UPPER ARMREST BASE PANEL LH
1. Connect the master switch connector.
  
  Fig 2: Identifying Master Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Attach the 2 clips and 5 claws to install the front upper armrest base panel.
  
  Fig 3: Identifying Front Upper Armrest Base Panel Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002