Component Function Check
- CHECK FUNCTION
- Turn ignition switch ON.
- Select "MEMORY SW 1", "MEMORY SW 2" "SET SW" in "Data monitor" mode with CONSULT-III.
- Check seat memory switch signal under the following conditions.
DATA MONITOR REFERENCE
| Monitor item | Condition | Status | |
|---|---|---|---|
| SET SW | SET SW | Push | ON |
| Release | OFF | ||
| MEMORY SW 1 | Memory switch 1 | Push | ON |
| Release | OFF | ||
| MEMORY SW 2 | Memory switch 2 | Push | ON |
| Release | OFF | ||
Is the indication normal?
YES: INSPECTION END
NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".