High Mounted Stop Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Perform these procedures only when replacing the high mounted stop light assembly.
A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

INSTALL HIGH MOUNTED STOP LIGHT GASKET
1. Install the new gasket.
INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY
1. Connect the connectors and clamp.
2. Install the stop light with the 2 nuts.
INSTALL ROOF HEADLINING ASSEMBLY
1. for Regular Cab:
  Install the roof headlining (see INSTALLATION ).
2. for Double Cab:
  Install the roof headlining (see INSTALLATION ).