LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Body, Lock & Security System) >> Intelligent Key System >> Terminals and Reference Value for BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Terminals and Reference Value for BCM

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
BCM VOLTAGE SPECIFICATION

Terminal Wire color Item Signal Input/output Condition Voltage (V) (Approx.)
1 PU Key ring illumination output signal Output Key ring illumination is lighting. Battery voltage
Key ring illumination is being turned off. 0
12 P/B Front door switch (Passenger side) Input Door open (ON) → Close (OFF) 0 → Battery voltage
13 P/L Rear door switch RH Input Door open (ON) → Close (OFF) 0 → Battery voltage
37 B/W Key switch Input Insert mechanical key from ignition key cylinder. Battery voltage
Remove mechanical key from ignition key cylinder. 0
38 W/L Ignition switch (ON) Input Ignition switch is in ON or START position Battery voltage
39 L CAN-H Input/Output - -
40 P CAN-L Input/Output - -
41 R/B Battery saver output signal Output 30 minutes after ignition switch is turned to OFF 0
Ignition switch is in ON position Battery voltage
42 L/R Power source (Fuse) Input - Battery voltage
44 Y Driver door lock actuator (Unlock) Output Door lock / unlock switch (Free → Unlock) 0 → Battery voltage
45 G/W Left turn signal lamp Output When door lock or unlock is operated using Intelligent Key.(1)
(ON → OFF)
Battery voltage → 0
46 BR/W Right turn signal lamp Output When door lock or unlock is operated using Intelligent Key.(1)
(ON → OFF)
Battery voltage → 0
47 Y/R Step lamp output signal Output Step lamp is lighting. 0
Step lamp is being turned off. Battery voltage
48 PU/W Room lamp output signal Output Room lamp is lighting.(2) 0
Room lamp is being turned off.(2) Battery voltage
49 B Ground - - 0
50 PU Door lock actuator (Lock) Output Door lock / unlock switch
(Free → Lock)
0 → Battery voltage
51 W/B Passenger and rear doors lock actuator (Unlock) Output Door lock / unlock switch
(Free → Unlock)
0 → Battery voltage
52 B Ground - - 0
54 W Power source (power window) Input - Battery voltage
55 G Power source (Fusible link) Input - Battery voltage
58 L Back door switch Input Back door open (ON) → Close (OFF) 0 → 9
62 W Front door switch
(Driver side)
Input Door open (ON) → Close (OFF) 0 → Battery voltage
63 P Rear door switch LH Input Door open (ON) → Close (OFF) 0 → Battery voltage
(1) In the state that hazard reminder operates.

(2) In the state that room lamp switch is in "DOOR" position.