LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Body, Lock & Security System) >> Remote Keyless Entry System >> ID Code Entry Procedure >> Key Fob Id Set Up With Consult-III
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key Fob Id Set Up With Consult-III

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If a key fob is lost, the ID code of the lost key fob must be erased to prevent unauthorized use. A specific ID code can be erased with CONSULT-III. However, when the ID code of a lost key fob is not known, all controller ID codes should be erased. After all ID codes are erased, the ID codes of all remaining and/or new key fobs must be re-registered.
  1. Touch "WORK SUPPORT".
  2. The items are shown on the figure can be set up.
    • "REMO CONT ID REGIST"

      Use this mode to register a key fob ID code.

      NOTE: Register the ID code when key fob or BCM is replaced, or when additional key fob is required.
    • "REMO CONT ID ERASUR"

      Use this mode to erase a key fob ID code.

    • "REMO CONT ID CONFIR"

      Use this mode to confirm if a key fob ID code is registered or not.

scientia non olet · About LEMON Manuals