RELAY CONTROL SYSTEM : System Description
WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.
CAUTION:
IPDM E/R integrated relays cannot be removed.
RELAY CONTROL SYSTEM REFERENCE CHART
| Control relay | Input/output | Transmit unit | Control part | Reference |
|---|---|---|---|---|
|
|
BCM (CAN) |
|
HEADLAMP SYSTEM |
| Front fog lamp relay | Front fog light request signal | BCM (CAN) | Front fog lamp | FRONT FOG LAMP SYSTEM : SYSTEM DIAGRAM |
| Tail lamp relay | Position light request signal | BCM (CAN) |
|
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMP SYSTEM |
| Illumination | INTERIOR ROOM LAMP CONTROL SYSTEM | |||
|
Front wiper request signal | BCM (CAN) | Front wiper motor | FRONT WIPER AND WASHER SYSTEM |
| Front wiper stop position signal | Front wiper motor | |||
| Rear window defogger relay | Rear window defogger control signal | BCM (CAN) | Rear window defogger | WITH AUTO A/C |
| Starter control relay | Starter control relay signal | BCM (CAN) | Starter motor | - |
| Cooling fan relay | Cooling fan speed request | ECM (CAN) | Cooling fan control module | COOLING FAN CONTROL |
| A/C relay | A/C compressor request signal | ECM (CAN) | A/C compressor (Magnet clutch) | COMPRESSOR CONTROL |
| Daytime running light relay 2 |
|
BCM (CAN) |
|
DAYTIME RUNNING LIGHT SYSTEM : SYSTEM DIAGRAM |
| Ignition relay | Ignition switch ON signal | Ignition switch | Each control unit, sensor, actuator and relay (Ignition power supply) | B2098 IGNITION RELAY ON STUCK |