Detailed Flow

WARNING: This page is about a different car, the 2010 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

INTERVIEW FOR MALFUNCTION
Interview the customer about the symptom.

GO TO 2.
SYMPTOM CHECK
Verify the symptom from the customer's information.

GO TO 3.
BASIC INSPECTION
Check the operation of each part. Check that no symptoms occur other than those specified by the customer.

GO TO 4.
SELF-DIAGNOSIS WITH CONSULT-III
Perform the self diagnosis with CONSULT-III. Check that any DTC is detected.

Is any DTC detected?

YES: GO TO 5.

NO: GO TO 6.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.

GO TO 7.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.

GO TO 7.
MALFUNCTIONING PART REPAIR
Repair or replace the malfunctioning part.

GO TO 8.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
Perform the self diagnosis with CONSULT-III. Verfied that no DTCs are detected. Erase all DTCs detected prior to the repair. Verify that DTC is not detected again.

Is any DTC detected?

YES: GO TO 5.

NO: GO TO 9.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.

Does it operate normally?

YES: Inspection End.

NO: GO TO 3.