Front Wiper Control
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
IPDM E/R detects front wiper stop position by a front wiper auto stop signal.
When a front wiper auto stop signal is in the conditions listed below, IPDM E/R stops power supply to wiper after repeating a front wiper 10 seconds activation and 20 seconds stop five times.
FRONT WIPER CONTROL REFERENCE
| Ignition switch | Front wiper switch | Front wiper auto stop signal |
|---|---|---|
| ON | OFF | The front wiper auto stop signal (stop position) cannot be input for 10 seconds. |
| ON | The front wiper auto stop signal does not change for 10 seconds. |
NOTE:
This operation status can be confirmed on the IPDM E/R "Data Monitor" that displays "BLOCK" for the item "WIP PROT" while the wiper is stopped.