Component Function Check

WARNING: This page is about a different car, the 2011 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "PUSH SW" in "Data Monitor" of BCM with CONSULT-III.

Check the push-button ignition switch signal under the following conditions.

TEST ITEM DESCRIPTION

Test item	Condition	Status
PUSH SW	Push-button ignition switch is pressed	ON
PUSH SW	Push-button ignition switch is not pressed	OFF

Is the indication normal?

YES: INSPECTION END.

NO: Go to "DIAGNOSIS PROCEDURE ".