LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Brake Control System (With VDC)) >> System Description >> System >> Abs Function >> ABS FUNCTION: System Description >> Input Signal And Output Signal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Signal And Output Signal

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Major signal transmission between each unit via communication lines is shown in the following table:

Component Signal description
Yaw rate/side/decel G sensor Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line(1):
  • Yaw rate signal
  • Side G sensor signal
  • Decel G sensor signal
Transfer control unit(2) Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:
  • Current 4WD mode signal
Combination meter Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication:
  • ABS warning lamp signal
  • VDC warning lamp signal
(1) Communication line between yaw rate/side/decal G sensor and ABS actuator and electric unit (control unit)
(2) Models with 4WD system
scientia non olet · About LEMON Manuals