Work Support

WARNING: This page is about a different car, the 2012 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Function

Description

UNIT CHARACTERISTIC WRITE

Writes the unit parameter of transfer to transfer control unit.

START CALIBRATION

Perform initial calibration of transfer control unit.

LOCK SLEEVE SENSOR⁽¹⁾ INITIALIZE

Format learning the transfer lock position sensor written to transfer control unit.

LOCK SLEEVE SENSOR⁽¹⁾ LEARNING

Perform learning the transfer lock position sensor.

OIL DETERIORATION INFO RESET

Format the transfer fluid viscosity written to transfer control unit.

⁽¹⁾	"LOCK SLEEVE SENSOR" means transfer lock position sensor.